More than 130 suppliers
ISO certified
In-house tech support
we Connect you
Bio-Connect

Products

Are you looking for life science and diagnostic reagents? We offer one of the most extensive ranges in the Benelux. There are currently more than 8 million products in our webshop, which are manufactured by more than 130 suppliers. We hope to support your research with everything you need.

253 to 264 of 143.100 products
Sort by
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-10UG
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-APC
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-BIOTIN
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-CARRIER-FREE
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-CY3
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-DYLIGHT488
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-DYLIGHT550
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-DYLIGHT594
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-FITC
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-HRP
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-IFLUOR647
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
Figure 1. Western blot analysis of ALG3 using anti-ALG3 antibody (A04688). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human HepG2 whole cell lysates, Lane 2: mouse ovary tissue lysates, Lane 3: mouse thymus tissue lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ALG3 antigen affinity purified polyclonal antibody (Catalog # A04688) at 0.5 microg/mL overnight at 4°C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # EK1002) with Tanon 5200 system. A specific band was detected for ALG3 at approximately 50-55 kDa. The expected band size for ALG3 is at 50 kDa.
Product group Antibodies
Boster Bio
Anti-ALG3 Antibody Picoband(r)A04688-PE
ApplicationsFlow Cytometry, Western Blot, ELISA
ReactivityHuman, Mouse
TargetALG3
  • SizePrice
2021222324

Didn't find what you were looking for?

Search through our product groups to find the right product

Back to overview
AntibodiesChemicalsProteins / Signaling MoleculesAssaysDNA / RNA / VectorsCell CultureGenome Editing and EngineeringMolecular BiologyLysates / ExtractsExpressionLabware / AccesoriesBody ProductsTechnique Specific ProductsArrays / SlidesDiagnosticBiologicalsMicrobiologyPromotions